new body

doode i bought the echo1 cqb version thinking that the iron sights were detachable, but sadly i was wrong. does anyone know where to buy m16/m4 metal bodies at the cheapest price? i know they usually range from $100-$250. The ones I was looking at were:







I just need to find them at a pretty resonable price

The One You Wanted But With Two Different Logos For A Great Price:

http://redwolfairsoft.com/redwolf/airsoft/ProductDetail?prodID=20352

===

http://redwolfairsoft.com/redwolf/airsoft/ProductDetail?prodID=20153

===

http://redwolfairsoft.com/redwolf/airsoft/ProductDetail?prodID=20154

----------------

Another One For $20 more:

http://redwolfairsoft.com/redwolf/airsoft/ProductDetail?prodID=17076

----------------

Another Cool One For $99.95:

http://redwolfairsoft.com/redwolf/airsoft/ProductDetail?prodID=21049

----------------

They Should All Fit Your Gun. Have Fun Putting It On.

----------------

- All Research Done By Nate

Shipping is going to be like $50 dollars so just get them from the States.

thx guys

noooo.... they do mass shipments of all their other stuff so the shipping will be a lot less than $50!

hay i was thinking that this might be a good buy http://www.gunnerairsoft.com/catalog/product_info.php?cPath=40_63_94&products_id=268
however its chinese, is the material any good? its not the same as the CA m15s r they?

get a CA body.
minimal mod needed, and all parts fit - except the hopup - you will need a 1 piece - i like the GP full metal - i can shoot approx 100+ yds. accurately with mine and a madbull full steel tooth piston and stock spring.



and ofcourse a good lube job on the box

If your going to get a metal body do not cheap out on a Classic Army. Get a G&P or Guarder Metal body.

ya.. like the review i just wrote up there.

hmm ok, so no on that cheap chinese one then right>?

No on the cheap chinese one and No on a Classic Army one.

yes actually read the review i wrote for once and get a good metal body for around $100 they will fit, and they are very solid bodies.

Nate wrote:

yes actually read the review i wrote for once and get a good metal body for around $100 they will fit, and they are very solid bodies.

Yea CA's have good bodies. Not compared to a G&P body which has real trademarks on it, and is only a little bit more expensive. If you have up to $250 Get a G&P metal body.

hold up, you can buy G&P metal bodies for only $100 dollars. just look at the links i posted

*****! shipping from Japan is expensive, looking at this wieght everything together would prolly cost $130-160

Shipping from there is going to be pretty damn high.

This thread has been cleaned up. Any more spats like this and you'll both be taking a brief vacation.

-Crimson

On-topic, might I suggest you check out www.evike.com or www.ehobbyasia.com. They both have a number of very nice metal bodies at nice cheap prices. I personally prefer the new gen. guarder bodies, those should work just fine for you.